Description

SF100B Underwater FishLight

Fire up a fish-feeding frenzy with the original SF100B Underwater FishLight. This powerful light features our IntensiTech Right Bright LEDs that deliver unmatched intensity—the exact light frequency fish recognize and respond to. The IntensiTech LEDs used in a HydroGlow Underwater Light are unmatched for brightness. Just one of our LEDs could be used to power a flashlight. We’ve increased the brightness by 90% over the last three years.

The SF100B is designed to anchor to the bottom and project upward. It is protected by a shatter-resistant HydroDome and the Elude eco-friendly, barnacle-resistant coating. We coat all SF model HydroGlow Underwater Lights with Elude, a revolutionary eco-friendly (biocide-free) marine coating that has effectively tripled the barnacle-free operational time of our lights.

The critical components and LEDs are flooded with Impervia, a state-of-the-art marine epoxy resin, to construct our lights. Other resins retain some level of porosity which can allow micro-droplets of brine to penetrate, potentially resulting in corrosion or light failure. It also has a higher flexural strength rating. And, unlike polyester, Impervia is very resilient and less prone to shrinkage or warping, meaning it can withstand an extreme range of water temperatures from a summer ocean to under the ice in the winter.

Each light includes a 50' cord (extra lengths available) and is perfect for creating a "See The Light" Safe Zone that attracts fish to your dock, waterfront dining area, or favorite fishing spot. The SF100B also helps "Bring 'Em Up" from deeper waters during warm summer months when fishing is typically more challenging.

Made in America. Built right. Backed by our "Proven Attraction" Performance Guarantee.

Technical Specs:

SF model lights should not be turned on in the air for longer than 2 minutes. The light illuminates an underwater area in a 120-degree field. For a wider spread of light, place the light deeper in the water. The SF series uses a 48V driver which is IP67 rated with a 6’ cord on the input side and needs to be plugged into 120VAC. This driver can be left outside in the rain without worry.

• Voltage: 48VDC (With 100W 120VAC driver)
• Current Draw: 0.42A
• Power Draw: 50W
• Length 9” total length including 4” cord grip
• Diameter 4”
• Wavelength 475nm Blue
• Weight: 4.2 lbs

A 50-foot cord is included with an IP68 waterproof locking connector to the driver. The driver has 1’ of cable on the output side and 6’ on the input side.

Q: "Should I choose Blue or Green?"

A: Water naturally filters light. The colors least scattered under water are in the green/blue part of the spectrum. This is why water appears either green or blue. At night, introducing green or blue light stimulates the microflora that tiny baitfish eat, which, in turn, attracts small fish that see the glint and flicker of the tiny feeding fish (and at maximum distances since green/blue light travels the furthest in water) which in turn creates a feeding frenzy that attracts the predator fish. So which is the right color? While green can be used in both freshwater or saltwater, we suggest blue for saltwater since it will travel further and reach the most fish.